|
|
Phone: 800-328-1235, 763-544-4035 Fax: 763-544-0986
Minneapolis, MN - Denver, CO - Omaha, NE
Rental
Rental Equipment
Below is a list of our rental items. Please call us if what you need
is not featured on this site. Click on the drop down box to view
and move to the various rental categories
Flir i60 Thermal Imager- Thermal imager to quickly scan electrical components,
pumps, motors, and even building infrastructure. Measures up to 350 C (662 F).
Free QuickReport software with report templates to simplify your work.
Click on link above for more information
Fluke Ti25 Thermal Imager- Infrared Technology instantly provides thermal images to quickly determine hot spots.
Measures up to 350 C (662 F). Easy to use. Simple "Point - Focus - Shoot" image capture operaton. Find loose electrical
connections, hot components, check building heat loss. Click on link above for more information.
LOAD SURVEY EQUIPMENT Top of Page
Dent Instruments ELITE Pro - Load profiling power meter, Amps (4 channels), Volts (3 Channels), VA,
PF, W, WH, Harmonics. Includes set-up and analysis software. Click on the link above for more information.
Ask us about PMC produced load reports.
Fluke 1735 - 3 phase power logger, 4 channels amps and volts. Measure up to 2000 amps and 600 volts.
V,A,W,PF,WH, harmonics. Captures voltage events, includes software. Click on the link above for more information.
AEMC 3000-24-2-1 - Dual range 300/3000 amp flexible CT. Click on the link for more information.
Dent Instruments FLN-3000 - Dual range 300/3000 amp flexible CT for use with the Dent ElitePro.
Click on the link above for more information.
POWER/POWER QUALITY/HARMONICS Top of Page
AEMC Model 3945 Power Pad - 3-phase power quality analyzer. Includes set of three 6500 Amp/24" AmpFlex
current clamps, serial cable, Data View Pro software. Power Quality, Harmonics to 50th, Disturbances, Captures
transients to 1/256th cycle. Click on the link above for more information.
AEMC Model 3950 - 3-phase power and demand analyzer. Includes set of three 2000 Amp current clamps, 4 voltage
leads and a printer for reports. Measures and logs all common electrical parameters.
Dranetz PP4300 Power Platform - 3-Phase power quality, energy, and harmonics analysis on 4 current & 4 voltage channels. Has
outstanding disturbance analysis functions. Motor Inrush task card available, flash memory adaptor. Includes 500 Amp & 300/3000
AmpFlex current clamps. Click on the link above for more information.
Dranetz PX5 Power Explorer - The state of the art in Power Quality and ease of use. 3-Phase analyzer to measure
load, harmonics, flicker, voltage disturbances, voltage and current imbalance. Meets IEEE 1159, IEC 6100-4-30,
and EN50160 standards. Includes 500 Amp & 30/300/3000 LemFlex current clamps. Also includes use of Dranview
software. Click on the link above for more information.
Dranetz 8000-2 Power/Harmonics Analyzer - 10-600 VAC, 0-3000 ACA, 1-3 phase analysis for Amps, Volts, KW,
KVA, PF, Harmonics, and Motor Rush. Click on the link above for more information.
Esterline Angus Mini Servo III - 3 Input AC amp or AC volt recorder with 100 mm chart. 0-600 VAC or 0-1000 ACA max. input with 4 switch
selectable ranges.
Fluke VR1710 Voltage Quality Recorder - Fast and easy recording of voltage trends, dropouts, and power quality. Transient capture with time stamp.
Click on the link above for more information.
Fluke 43BPower/Harmonics Analyzer - 600 VAC, 500 AAC rated, true RMS sensing, reads PF, VA, VAR, Harmonics. Windows software
for analysis of stored readings. Click on the link above for more information.
Fluke 434 Power Quality Analyzer - 3-Phase analyzer, 4 Voltage and 4 Current channels. Measure V, A, Hz, W, VAR,
VA, PF, Harmonics, Flicker, KWH, KVARH. Measure up to 2000 A. Click on the link above for more information.
Yokogawa CW240 Clamp-On Power Meter - 3-Phase true RMS power and demand analyzer.. Includes 4 voltage leads
and 4 500 Amp current probes. Click on the link above for more information.
B*K Precision 2522B Oscilloscope - 20 MHz dual channel bench digital oscilloscope w/accessories. Click on the link above
for more information.
Fluke 123 Scopemeter - 20 MHz dual channel DSO with accessories. Click on the link for more information.
LOCATORS/CABLE METERS Top of Page
Amprobe AT-2005 - Locates breakers, neutrals, ground wires, shorts and opens. Will trace live or dead circuits. Click on the link
for more information.
Amprobe AT-4005 - Locates wiring, breakers, neutrals and ground wires. Also locates shorts & opens. Click on the link for more information.
Dynatel 2273M-iD/UC3W-RT Cable/Fault Locator - Quickly & accurately locates earth return faults & traces underground cable & pipe paths.
Click on the link above for more information.
Dynatel 500C Pipe & Cable Locator - Locates position & depth of pipe & cable buried up to one mile deep.
Fluke 652 LAN Cable Meter - LAN cable meter with built in TDR for cable length.
Greenlee BLL-200 - Locates energized & unenergized cables. Will pick up line frequency (60 Hz) and detect to a depth of 20 ft.
Click on the link above for more information.
Megger CFL510F Time Domain Reflectometer - The Megger CFL510F is a compact, ergonomically engineered Time Domain
Reflectometer designed for field use. As such it is housed in tough, ABS flame-retardant housings and protected from the ingress
of dust and moisture to IP54. Additionally, the product comes complete with multi-purpose test and carry cases designed for hands
free neck-strap and tool-belt use. Click on the link above for more information.
Progressive 2003 Pulser - General purpose ground fault detector. Click on the link for more information.
Progressive Tracker II Model 501 - Easy to use buried pipe & cable locator. Click on the link for more information.
GROUND RESISTANCE TESTERS-MEGOHMMETERS-HI-POTS Top of Page
AEMC Model 1045 Megohmmeter - Battery powered hand held megohmeter. 250/500/1000 Volt , 0-2000 Megohm range.
Click on the link above for more information.
AEMC Model 3620 Earth Ground Resistance Tester - Analog tester performs 2 & 3 point tests. Click on the link for more information.
AEMC Model 3731 Earth Ground Resistance Tester - Clamp-on digital tester with memory and alarm. Click on the link for more information.
AEMC Model 4500 Earth Ground Resistance Tester - Our best ground reistance/milli-ohm meter. 4 wire earth ground tester for 2, 3, & 4 point
tests. 500 ft. leads, .001 Ohm resolution. Click on the link above for more information.
AEMC Model 4610 Earth Ground Resistance Tester - Digital ground resistance tester for 3 or 4 point tests. Click on the link for more information.
AEMC Model 5600 Micro-Ohmmeter - 4 terminal Kelvin resistance measurement, 10A test current, six selectable ranges from 2000 uOhms to 200
Ohms.Click on the link above for more information.
Amprobe AMC-4 Megohmmeter - Hand crank megohmmeter. 500 /1000 Volt, 0-500 Megohnm ranges. Click on the link for more information.
Associated Research 3605 Hi-Pot Tester - 0-5 KVAC range.
Biddle 230315 Hi-Pot Tester - 0-3 KVAC range. Click on the link for more information.
Extech 380260 Megohmmeter - Batery powered, digital megohmmeter. 250/500/1000 Volt, 0-2000 Megohm ranges. Click on the link for more information.
Extech 380360 Megohmmeter - Batery powered, digital megohmmeter. 250/500/1000 Volt, 0-2000 Megohm ranges. Click on the link for more information.
Fluke 1550B Megohmmeter - The Fluke 1550B is a digital insulation tester capable of testing switchgear, motors, generators and cables at up to
5000 V DC. It can be used for a wide range of tests: from simple spot checks to timed tests and breakdown tests. Measurement storage and PC interface
software make it ideal for preventive maintenance. Heavy-duty leads, probes and alligator clips fit in the custom carrying case, for a rugged field testing
kit. Click on the link above for more information.
Fluke 1587 Clamp-On Ground Resistance Tester - The Fluke 1587 Insulation Multimeter combine a digital insulation tester with a full-featured,
true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative
maintenance. Click on the link above for more information.
Fluke 1630 Clamp-On Ground Resistance Tester - Clamp-on ground resistance tester. Measure current up to 30 amps AC. Click on the link for more information.
RECORDERS/DATA LOGGERS Top of Page
Dickson SC8-90-B-24 - Measures ambient temperature 40 to 90 degrees on a 24 hr. circular chart.
Monarch DC-2000 - 12 channel paperless recorder, compact flash, ethernet connectivity. Click on the link for more information.
Monarch DC-3000 - 6 channel paperless recorder, memory card media
Yokogawa HR2400 30 Point Recorder - 30 channel dot matrix recording with digital display. Records mA, mV, DCV, thermocouple,
RTD, and pressure (with aux. transducer). Click on the link above for more information.
Yokogawa SR1003 3 Pen Recorder - 3 channel continuous writing with digital display. Records mA, mV, DCV, thermocouple, RTD, and pressure
(with aux. transducer). Click on the link above for more information.
Yokogawa SR1006 6 Point Recorder - 6 Channel dot-matrix printing with digital display. Records mA, mV, DCV, thermocouple, RTD, and pressure
(with aux. transducer). Click on the link above for more information.
Yokogawa XL100 Portable Data Station - 16 channel paperless recorder with color LCD display. records: DCV, mV, thermocouple, pulse signal,
logic signal, differential calculation and statistical caliculation. Records data to memory card media. Up to eight hours continous operation by battery. Auto
setup and run by external memory. Applications : Testing and evaluating product temperatures using a thermostatic chamber, Regular maintenance
of various equipment (electric furnaces, inverter control units, injection molding machines, etc.), Detecting and analyzing the cause of temperature
changes associated with the malfunctions of equipment, Diagnosing the deterioration of batteries (up to 48 V). Click on the link above for
more information.
Fluke 700 PTP-1 Pressure Pump - For use with 700 series pressure modules. Ideal for calibrating pressure transmitters, pressure switches and pressure
gauges up to 600 PSI/40 bar. Click on the link above for more information.
Fluke 700P05 Pressure Module - 0-30 PSIG pressure module for use with the 725 series calibrator. Click on the link for more information.
Fluke 700P27 Pressure Module - 0-300 PSIG pressure module for use with the 725 series calibrator. Click on the link for more information
Fluke 700P29 Pressure Module - 0-3000 PSIG pressure module for use with the 725 series calibrator. Click on the link for more information
Fluke 707 Loop Calibrator - 0-24 mADC source or read for all 4-20 ma loop functions. Measure 0-28 VDC. Click on the link
for more information.
Fluke 712 RTD Calibrator - Measure & simulate RTD's. Operates with 7 types of RTD's. Ramp & step ramp output functions.
Click on the link above for more information.
Fluke 714 Thermocouple Calibrator - Measure & simulate 9 types of thermocouples. Ramp & step ramp output functions. Click
on the link above for more information.
Fluke 725 Multi-Function Calibrator - Measure volts, mA, RTD's, thermocouples, frequency, ohms, and pressure (with 700 series modules) to test
sensors and transmitters. Click on the link above for more information.
Fluke 743B Documenting Calibrator - Measure volts, mA, RTD's, thermocouples, frequency and ohms to test sensors and transmitters. PC interface.
Stores up to 8000 records in datalogging mode.Click on the link above for more information.
.jpg)
Controlotron Model 1010WP Ultrasonic Flowmeter - Transit time, ultrasonic portable flowmeter. Fixturing available for 3/4 inch
thru 48 inch pipe. Includes ultrasonic thickness gage for pipe thickness. Click on the link above for more information.
ADDITIONAL EQUIPMENT Top of Page
Extech 407735 Sound Level Meter - Dual range: Lo 35 - 100 dB, High 65-130 dB. A and C weightings, .1 dB steps, 4 digit LCD display.
Click on the link above for more information.
Extech 42545 /Infrared Thermometer - High and low alarm set points, Built-in laser pointer identifies target area, Wide temperature range
from -58 to 1832°F (-50 to 1000°C). Click on the link above for more information.
Monitor 42B-1 AC Milligaus Meter - Measures environmental electrical and magnetic fields from power distribution lines, lighting, etc. True
RMS, stable low-level readings with audio speaker. 0-.5 milligauss to 2.5 gauss, 40 Hz to 1 KHz.
Raytek PM Infrared Temperature Gun - Laser sight, measures 0-1600 F/-18 to +870 C. min/max, differential, average temp, hi/lo setpoints,
adjustable emissivity levels.
Shimpo DT-207L-S12 Tachometer - Contact or non-contact tachometer. Measures RPM, MPM, YPM, FPM, IPM plus total yards, feet and inches. Click on the link
above for more information.